If you love the ambiance of a wood warm fireplace, besides during donât comparable the disordr and inconvenience of building a fire, upgrading your fireplace with gas warm logs can exist an simple and affordable solution. Most traditional wood warm fireplaces can exist converted into a gas warm application with some minor tweaks and upgrades. if you already eat gas logs installed at your firebox, you can upgrade your gas wood stand ought a more modern design, which will improve the fever and usability of your gas logs.
1. Prepare the Firebox
1) Install a carbon monoxide detector at your home. Carbon monoxide is caused when fuels, such because the natural gas used with your gas logs, are no completely burned. Unsafe levels of carbon monoxide cannot exist detected by smell or view and can reason death. because your safety, a carbon monoxide detector ought exist installed at the fireplace room and each bedroom at the home. The detector will exist your sole warning against unsafe levels of carbon monoxide at the home.
2) Depending above your offer configuration, you will lack ought conduct one of two things: install a gas row or complete off the gas supply.
- Shut off the gas supply: if your fireplace is already configured because a gas wood application, then exist sure ought complete off the gas supply ago attempting these procedures. Failure ought pursue this step can originate at a eliminate or explosion that can originate at symbol damage, injury, or even loss of life. Once the gas row is complete off, promote ought isolate 1, step 2.
- Install a gas line. if you were using the fireplace because a wood warm application, you get ought first install a gas row ago you can install gas logs. This step ought exist completed by a certified professional. Improper mechanism of the gas row can reason symbol damage, severe injury, or death. Once the gas row is installed, promote ought isolate 1, step 5.
3) transfer the old gas logs. Put above a connect of vocation gloves and carefully transfer the old logs from the firebox. The logs will typically arise straight off the grate. ensure you eat a box or trash bag ought involve the old logs back removal.
4) transfer the grate. Once the logs are removed, there will apt exist a grate installed at the firebox. transfer the masonry screws that win the grate ought the firebox, and lay the grate ought the side because disposal.
5) Disconnect gas row from the burner. Ensuring the gas row is complete off first, disconnect the gas row from the burner. transfer the old burner and lay aside because disposal.
6) transparent the firebox. Before installing your new wood set, thoroughly transparent inside the firebox. transparent up any soot, dirt, or debris, and then apply a rescue vacuum ought transfer any finer particles that are difficult ought sweep. if the fireplace was used ought burn wood, encounter a chimney transparent ought eat the chimney professionally cleaned.
2. Install new gas logs.
1) mingle the gas line.Once your firebox is fully clean, and the chimney has been professionally cleaned (for wood warm fireplaces), itâs time ought mingle the gas row ought your new burner.
- Applying pipe rope sealant nearly the gas row connection above the burner.
- Attach the gas supply row ought the burner.
- Fasten the connection tightly using a wrench.
2) Install the burner. lay the burner at the desired post inside the firebox. Then apply a masonry part ought habit holes at the firebox brick. This will create it possible ought win the burner into lay with the masonry screws. familiar the mechanism by screwing the masonry screws into place.
3) Install the Grate. if your gas wood stand came with a grate, install the grate above the burners.
4) inspect because leaks. Once your burner and grate are at place, cost above the gas supply ought restrain because leaks. Spray a water and soap mixture over the gas row ought restrain because leaks. Any leaks will exist evident by the bubbles created at the leak site. if leaks are found, acknowledge inherent steps ought too tighten connections or replace faulty hoses.
5) Install the gas logs. mechanism of the gas logs will convert by brand and model, hence exist sure ought reference your mechanism manual because concrete directions. at general, the logs will sole adapt at the accurate configuration. lay each wood above the intended pin until crude logs are at place.
6) Install accessories. if your gas wood kit came with accessories, such because ash covered coals and sway wool, disperse them nearly ought confer the stand a realistic touch.
7) Enjoy. Youâre done. cost above your gas fireplace and understand the beautiful, hassle-free warmth of your gas warm fireplace.
